英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字,中文词皆可:

prandial    
a. 膳食的,正餐的

膳食的,正餐的

prandial
adj 1: of or relating to a meal

Prandial \Pran"di*al\, a. [L. prandium a repast.]
Of or pertaining to a repast, especially to dinner.
[1913 Webster]


请选择你想看的字典辞典:
单词字典翻译
prandial查看 prandial 在百度字典中的解释百度英翻中〔查看〕
prandial查看 prandial 在Google字典中的解释Google英翻中〔查看〕
prandial查看 prandial 在Yahoo字典中的解释Yahoo英翻中〔查看〕





安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • What Is Chip Formation?- Types of Chips In Metal Cutting
    High cutting speed Minimum friction between the chip and tool interface Small depth of cut Advantages The formation of continuous chips during the machining process has the following advantages Better surface finish to the ductile material Less heat generation due to minimum friction between the tool face and chip Low power consumption
  • Different types of chips in metal cutting (Pdf) - EngineeringTribe
    These types of chips are formed during metal cutting The chip formation during metal cutting is based on various factors such as, Mechanical properties of a workpiece Depth of cut Tool rake angle Cutting velocity Feed rake Cutting fluid used while machining Cutting region temperature Required surface finishes Friction coefficient Based on the above-listed factors, the chip is formed during
  • Types of Chips in Metal Cutting – Basic of Chip Formation
    Types of chips formed in the machining process There are three main types Of cutting chips that Formed due to machining a workpiece by using a single-point cutting tool either on the Lathe machine Or Milling machine Different types of chips of various shape, size, color, etc are produced by machining depending upon:
  • Types of Chip Formation – Continuous, Built-Up Edge . . . - Mecholic
    Cutting speed, feed, and depth of cut Tool geometry A machining environment such as temperature and type of cutting fluid used Other less significant factors that affect chip formation are coefficient of friction and the surface finish of cutting tool The chips produced during the machining can be broadly classified into the following types
  • Fundamentals of Cutting - IIT Kanpur
    Fundamentals of Cutting Examples of cutting processes Figure: Basic principle of the turning operations Figure: Two-dimensional cutting process, also called orthogonal cutting Note that the tool shape and its angles, depth of cut, to, and the cutting speed, V, are all independent variables
  • What are the different types of chips formed during machining?
    In machining processes, chips are formed as the cutting tool removes material from the workpiece The type of chip produced depends on factors like cutting speed, feed rate, tool geometry, tool material, workpiece material, and the use of cutting fluids
  • Theory of Chip Formation in Conventional Machining
    The orthogonal model can be used to approximate turning and certain other single-point machining operations so long as the feed in these operations is small relative to depth of cut
  • Chip Formation: Meaning and Geometry | Metal Cutting | Metallurgy
    The depth of cut t which is actually the feed in turning operation changes into the chip thickness t c This experiences two velocity components V c and V s (Velocity of the chip relative to the tool, and velocity of the chip relative to the workpiece along the shear plane)
  • Metal Cutting Process: Chip Formation and Types
    Types of Chips Continuous Chip The continuous chip is the normal procedure of cutting and provides the best surface finish when machining common ductile materials It consists of the work material shearing and the sliding of the chip on the side of the cutting tool
  • What you need to know about chip formation - Seco Tools
    What you need to know about chip formation - Most important during the machining process is to have such a chip formation and evacuation that the cutting process is not disturbed and that no damage is done to the machine tool, cutting tool and workpiece Also, the safety of the machine tool operator needs to be safeguarded
  • Investigation of chip formation in high speed end milling
    The experiments were conducted on a high speed machining center Makino V-55 The machining conditions used in this study are as follows: spindle speed, 10–30k rpm; the axial cutting depth varies from 0 1 to 0 8 mm; and the feed rate is in the range of 0 025–0 05 mm tooth The test material is AISI H13 hardened to HR c 55, and its chemical composition is: C: 0 37%, Cr: 5 3%; W: 1 4%; Mo: 0
  • What are Different Types of Chips In Metal Cutting? with [PDF]
    The types of chips formed in the machining process depend on some basic factors In machining, the formation of chips is a necessary index because it indicates directly or indirectly the: Nature and behavior of the material under the machining process Nature and degree of interaction in chip interfaces





中文字典-英文字典  2005-2009