英文字典,中文字典,查询,解释,review.php


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       


安装中文字典英文字典辞典工具!

安装中文字典英文字典辞典工具!










  • PSA: Using fan hubs and splitters. Killed a motherboard fan . . . - Reddit
    TL;DR: Try to use a Fan Hub that is externally powered via SATA for Molex 4-pin, avoid drawing the power from your motherboard if you can If you're using a splitter, definitely stay under the motherboard header amperage rating (e g 3 fans @ 0 2A each, fan header at 1 0A, 0 6A < 1 0A you're good!)
  • Are case fan hubs safe to use? - Toms Hardware Forum
    Yes, Hubs are safe, and Silverstone is a reputable maker The key characteristic of a HUB like that is that it gets all of the power for its fans directly from the PSU, and thus avoids the
  • Connecting Case Fans to Your Motherboard: A Step-by-Step Guide
    Using a fan splitter or hub is safe, provided you do not exceed the total current capacity of the motherboard’s fan header Overloading can damage the header or the motherboard itself For safer operation, use powered fan hubs that connect directly to the PSU, distributing power efficiently without over-reliance on the motherboard’s power
  • Do I really need a FAN HUB? - Cooling - Linus Tech Tips
    Try to get a max current rating for the hub, if available, and especially look at the max current rating of the fan header (typically 1 amp, may be higher for some CPU_FAN headers) Then check the power draw of the fans you intend to plug to this hub, and make sure that the sum is below the header's rating (typical 120mm fans are in the 0 2-0 3
  • Do I need a fan hub or fan splitters : r buildapc - Reddit
    Fan hubs and splitters do the same thing, but there are a few differences A fan splitter will split a fan header into two or three headers, and is not externally powered A fan hub usually supports more fans than a splitter, but has to be powered by a SATA cable
  • [SOLVED] Would it be safe to plug in multiple fan splitters on a fan hub?
    The way the fan HUB supplied with that case operates is that all of the fan power comes from the PSU via its connection to a SATA power output, and it does NOT draw any power from the
  • Are fan hubs generally safe to use? : r buildapc - Reddit
    Fan hubs should have their own power input The cable you’d run from the hub to the motherboard should have only two pins on it One for the pwm signal from the motherboard and the other for rpm speed from the hub There shouldn’t be any power or ground cables at all
  • how safe is it to run a SATA Power to 6 Pin to power a fan hub?
    my icue link hub needs a 6pin pcie but i used all pcie on my gpu, so i found this as a solution and did the power consumption math and turned out with this: 3x CORSAIR iCUE Link LX120-R RGB Fans: Each draws 0 4A at 12V Power per fan = 12V * 0 4A = 4 8 Watts Total for three 120mm fans = 3 * 4 8W


















中文字典-英文字典  2005-2009